- 100% Recyclable
- Non-itchy, non-cancerous. FDA, HACCP and BRC approved.
- Hypoallergenic, no crumbling material, so no airborne micro particles, does not promote respiratory problems.
- Hygiene antistatic, does not collect dust, does not retain bacteria, odors nor dirt.
- Does not retain moisture, does not promote fungus nor bacteria.
- Does not attract nesting, rodents, birds, or insects.
- Thin, light-weight yet great insulation power.
- Confirmed and tested thermal resistance = R value
- Recognized Thermal performance R value= 3.72 m²K/W (Polynum™ Ultra) measured by the Geo sciences laboratory using guarded hot Box
- Low emissivity surfaces (e=0.03), reflecting 97% of radiation heat.
- Thermo-cellular air bubbles (low K) to control convection and conduction heat
- Impermeable 100% impermeable to air and water
- High Resistance treatment to the aluminum surface, reducing possible corrosion over time.
- Not affected by solvents, grease, roofing frame treatments (solvent or aqueous solutions)
- Zero moisture absorption. Acting as vapor barrier when required!
- 15 to 20% Hygrometry reduction in the hygrometry rate
- Effective Noise reduction. (Actual noise reduction varies per products and application)
- Temperature stability from -40 °C to +88 °C
- Long life: insulating power remains constant over time
- 10 to 15 years product warranty
- Polynum™ installation process is clean, fast and efficient
- Polynum™ required less labor and less time covering similar area compare with bulk insulation
- Polynum™ can be installed anywhere in the buildings.
- Polynum™ only required measuring tape, cutting knife, ducting tape and pair of hands...
- Polynum™ can be left exposed for the installation duration. No need extra cover or handling.
- Polynum™ can shaped and cut to size, reduced wastage!
- Polynum™ requires no gloves or special protection aids.
- There are almost no limitations to where Polynum™ can be used
- Polynum™ products are thin and light. For a truck of bulk insulation, you will require only ¼ or less space for Polynum™.
- Polynum™ cuts transportation costs = reduce energy spending and CO2 emission = helps to fight global warming!
- Polynum™ cuts storage space. Saves on handling (loading and un-loading), save on site's storage!
- Polynum™ cuts overhead costs and provides effective solution for today's competitive markets!
- Polynum™ cuts your energy bill...!!! Cuts CO2 emission from air-condition units in summer, heating expenses in winter
- Polynum™ is safe product = reduces building impact on human health (health and environment)
- Polynum™ has no health risk associate with it (compare with some of the available bulk insulation products), therefore, it contributes to the society well-being.
- Polynum™ reduces cost of operation, cost of transportation, cost of handling and wastage.
- Polynum™ is effective insulation solution, helping all of us to deliver better and greener future!
Don't play with FIRE !!!
In some countries, there are no firm fire regulations for insulation materials. This promotes the use of dangerous and un-tested products, which can put you and your loves one at great risk !!!
Why do you need to take a risk when you can use safe and tested product as polynum™ ???
Polynum™ thermal reflective insulation is produced under strict international standards, for safety and durability. To ensure maximum safety to our customers we test our products following tough insulation fire related standards and regulations, such as EU, DIN, JIS, BS, AS/NZ and ASTM. Our insulation products are tested regularly only at international recognized laboratories for vertical, horizontal and corner flame ire spreads, heat and smoke release.
Our insulation products are produced with safe to use FR, Fire Retardant additives, to ensure proper reaction (or shall we say, no reaction) to fire. On top, our secretive polymer recipe used for our PE bubbles is dripping free, and contains zero risk to users.
When using Polynum™ thermal reflective insulation you can ensure your project safety. As we say: Don't play with FIR...!!!
* Details about products fire rating can be found in product specification sheet. In the event that you wish to receive copy of any of our certificates kindly let us know (using the comment window).
We believe that Polynum™ insulation is your silence energy saver partner for life.
It is easy to say, but hard to deliver! To make sure that our customers do get what we promise we manufacture our Polynum™ from top quality materials.
Polynum™ insulation is prepared with thick aluminum foil (8 to 18 microns, compare to 6 and 7 microns used by most producers). This guarantees sustainability, durability and top performances under various tough conditions.
We understand that insulation may be exposed to various tough conditions, which can promote corrosion (humidity, acidity, fume, and so forth). To reduce corrosion risk (which will affect any reflective product performances) we have introduced a winning anti-corrosion formula applied onto our aluminum foil surface.
To ensure your long terms satisfaction level we produce our insulation products in a glue-free process. Our bubbles formation and lamination process occur at the same time, using 200°C heating process. Such production practice is proven to be very effective for reflective insulation durability, minimizing possibilities for delaminating due to buildings and environmental conditions.
To our customers who may wish to get extra strong products, we provide an option to add reinforced netting. Such option is valid for all our products, worldwide.
When using Polynum™ thermal reflective insulation you can ensure long term performances, and peace of mind. Don't risk your potential saving, use Polynum™.
